Power Flushing in Poole & Surrounding Areas

Our Services
potterton accredited installer
ideal boiler installer
proud to install vaillant boilers
baxi boilers logo

Why pick RW Gibbs to give your heating systems a power flush? The reason being simple: we have the best equipment to do the job that with the best gas engineers and knowledge of central heating systems and we use the most advanced power flushing equipment to guarantee we remove all the sludge from the home heating system, undergoing a central heating power flush will save you hundreds off your yearly gas bill because it makes your central heating system run more efficiently. Most significantly, radiators that you’re having issues with will now perform to their full potential. Our company offers power flushing in Poole every day to our clients in Poole from as little as £250, we understand what’s needed to have the dreaded sludge removed from your heating system.

Do I need a Power Flush?

This will likely be determined by a few key factors:

How old is your heating system – Three years or more. This includes your under floor pipework, radiators as well as central heating boiler. Even if you have had a new boiler replacement not too long ago, you should still make use of a Power Flush if one wasn’t part of the installation (nearly all leading boiler manufacturers recommend a thorough system flush ahead of the installation of a boiler to eliminate any debris, sludge and scale). The only way to do this successfully is by Power Flushing.

Or ff your boiler system suffers from any of these symptoms:

  • Cold spots on your radiators
  • Radiators taking a long time to heat up
  • Frequently needing to bleed radiators
  • Black water originating from bleed nipple
  • Vibration or banging in pipe work
  • Hot water tap fluctuating between hot and cold water
  • Noise from the boiler i.e. Pump whining / grinding / banging
  • Diverter valve jammed or replaced soon after a summer shutdown

before and after picture of power flushing in poole

What are the benefits of a Powerflush?

  • Inhibitor will prevent future corrosion
  • Radiators will work to their maximum efficiency, saving you money on your heating bills
  • Potential money could be saved on central heating repairs
  • Increased life to your central heating pump
  • Help to eliminate banging noises (kettling)
  • Prolongs your boiler life, find more info here

The Power Flushing Process Explained

The whole process of power flushing is quick and easy, it can usually be performed in less than one day on most homes. However, more substantial systems and commercial premises normally take more time to power flush.

So what does power flushing in Poole entail? Upon arrival our power flush expert will inspect your boiler system and pick ougas safe registered gas engineer in poolet the best place to connect the power flush equipment. Soon after attaching the power flush machine to your system, a solution of water, rust inhibitors and chemicals are pumped into the system. This solution lifts the black iron oxide sludge and lime scale and pushes it through the system, As the solution goes through the system a special MagnaClean magnetic filter captures the iron oxide and lime scale, removing it from the system and allowing only liquid to pass back into the boiler system. Once all of the iron oxide sludge plus limescale have been removed from the system, the power flush is completed, permitting water to once again circulate freely around the central heating system. The chemicals and inhibitors remain in the heating system that will help protect your system from future build ups. A MagnaClean filter and also limescale inhibitor can also be installed after the power flush to help provide even better protection from further buildup.

Contact RW Gibbs

Call our friendly, reliable experts for power flushing in Poole today. All of our work is guaranteed and insurance backed, and we benefit from an enviable local reputation.